High-pressure water mist fire protection system
A fire protection solution using a high-pressure pump to create a fine water mist, per TCVN 13657:2023. Decor Viet - PTY handles consulting, design, installation and maintenance.

| Highlight | Fine water mist – less water, less damage |
|---|---|
| Applicable standards | TCVN 13657-1:2023 · TCVN 13657-2:2023 |
| Extinguishing agent | Water (optionally with additives per TCVN 13457-1:2022) |
| Services | Consulting – design – supply – installation – maintenance |
A high-pressure water mist fire protection system uses a high-pressure pump to drive water through special nozzles, creating a fine mist that blankets the fire zone. The system is governed by the national standard TCVN 13657:2023 – High-pressure water mist fire extinguishing systems (Part 1: Design and installation requirements; Part 2: Technical requirements and test methods).
Why high-pressure water mist?
- Extinguishes with water – but much less of it: very small droplets absorb heat quickly, cooling the fire and limiting oxygen at the seat of the fire, so water consumption is far lower than a conventional sprinkler system.
- Limits secondary damage: less discharged water means less damage to equipment, goods and the building structure.
- Safe for people and the environment: the extinguishing agent is mainly clean water and is non-toxic.
- Compact piping: high pressure allows small-diameter pipes, which suits buildings with limited installation space.
System components
According to TCVN 13657-2:2023, the system consists of fire pumps and a standby pump, a control panel, solenoid valves, high-pressure mist nozzles, a water tank with automatic top-up and low-level alarm devices, a water filter, safety valves, pressure-reducing valves, pressure indicators, plus hose reels and fire-fighting nozzles. See each item under Products in this solution below.
Where it applies
The system suits spaces where water use and secondary damage must be limited: machine rooms, electrical and switch rooms, data centers, cable tunnels, pump and generator rooms, factories, warehouses and areas with high-value equipment. The exact solution is set by the design engineers based on the building and current regulations.
Services from Decor Viet - PTY
Decor Viet - PTY is licensed to provide fire protection services, with fire protection engineers and pressure-test equipment to deliver end to end:
- Survey, consulting and design following TCVN 13657-1:2023.
- Equipment supply: pumps, nozzles, valves, control panels and high-pressure piping.
- Installation, pressure testing, commissioning and handover.
- Operation, maintenance and warranty – requests accepted 24/7 and handled within 24 hours.










